Jorc Pobuda d.o.o.

Jorc-Pobuda d.o.o.
Vrhniška 47, SI-1354 Horjul, Slovenija
tel.: +386 1 7500 243, fax: +386 1 7500 241
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Slovenščina | English

Skip to content

D-LUXThe D-LUX Timer is produced using SMT (Surface Mounting Technology), ensuring improved performance and consistency process.
The unit offers true digital time cycle programming luxury.
The D-LUX Timer is designed to fit all solenoid valves with connection type DIN 43650 - A/ISO 4400.

COMBOThe EZ-1 is our economy applications timer controlled condensate drain.
The EZ-1 is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

.

KaptivKaptiv is a zero air loss, electronic level sensing condensate drain. Condensate level sensing is based on contactless electronic measurement thus eliminating the need for moving mechanical parts and eventual failures resulting from that.

FLUIDRAINFluidrain is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

EZ-1The EZ-1 is our economy applications timer controlled condensate drain.
The EZ-1 is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

TEC-11The TEC-11 removes condensate, automatically, from compressed air filters and small dental compressors.
The TEC-11 is designed for ALL compressed air filters, regardless of their capacity or size (1/4

TEC-55The TEC-55 is a multi-point timer controlled condensate drain, designed to control up to four valves (draining points).
A typical compressor installation has a compressor, aftercooler, dryer, filter(s) and a receiver (airtank). All draining points can now be centrally controlled by the TEC-55.

TEC-22The TEC-22 was designed and introduced in the early 1990’s. The TEC-22 was our first big selling timer controlled condensate drain and after many years the newly designed OPTIMUM started replacing its applications.

More ...

D-LUX

The D-LUX Timer is produced using SMT (Surface Mounting Technology), ensuring improved performance and consistency process. The unit offers true digital time cycle programming luxury. The D-LUX Timer is designed to fit all solenoid valves with connection type DIN 43650 - A/ISO 4400.

COMBO

The EZ-1 is our economy applications timer controlled condensate drain. The EZ-1 is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system. ...

Kaptiv

Kaptiv is a zero air loss, electronic level sensing condensate drain. Condensate level sensing is based on contactless electronic measurement thus eliminating the need for moving mechanical parts and eventual failures resulting from that.

FLUIDRAIN

Fluidrain is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

EZ-1

The EZ-1 is our economy applications timer controlled condensate drain. The EZ-1 is suitable for all compressed air system components (compressors, after coolers, dryers, filters, pressure vessels and drip legs), regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system. ...

TEC-11

The TEC-11 removes condensate, automatically, from compressed air filters and small dental compressors. The TEC-11 is designed for ALL compressed air filters, regardless of their capacity or size (1/4" to 3" connections size). The TEC-11 incorporates a direct acting valve assembly and VITON seals to ensure a long life operation.

TEC-55

The TEC-55 is a multi-point timer controlled condensate drain, designed to control up to four valves (draining points). A typical compressor installation has a compressor, aftercooler, dryer, filter(s) and a receiver (airtank). All draining points can now be centrally controlled by the TEC-55.

TEC-22

The TEC-22 was designed and introduced in the early 1990’s. The TEC-22 was our first big selling timer controlled condensate drain and after many years the newly designed OPTIMUM started replacing its applications.

« Previous Next »

Home

Wednesday27 January 2021

Skip to content

Why choose us ?

We are experienced in the development and production of condensate drain controllers and various industrial electronics. We develop and produce our own products. Due to our concern for quality our products remain in the lead. Our company can offer you all kinds of service- from r/d and prototypes to production and assembly.

Advantages

Efficient R/D
Quick response
Up to date production
Quality products and services
Complete or partial engineering solutions

Our products

Our company's insistance on reliability and quality of our products has allowed us to increase our share in the market despite constantly growing competition. Although copies of our products tend to emerge every now and then- housing designs and electronic solutions- our products remain the only "real thing".

Zaposlovanje - operater na SMD liniji, testnih napravah

Razpisujemo prosto delovno mesto.

VEČ →

Zaposlovanje - delo v razvoju

Razpisujemo prosto delovno mesto.

VEČ →

Top